What Is Methacrylic Acid (CAS 79-41-4)?
Methacrylic acid, abbreviated MAA, is an unsaturated carboxylic acid with the molecular formula C4H6O2 and CAS number 79-41-4. Its systematic name is 2-methyl-2-propenoic acid and it is also written as 2-methylacrylic acid. At room temperature MAA is a colourless liquid with a sharp, acrid odour, and it crystallises below about 14 °C, so a drum delivered in cold weather may arrive partly solid and has to be melted gently and completely before it can be pumped or dosed. It is soluble in water, ethanol and ether, and it polymerises readily unless it is inhibited.
Key Properties and Typical Industrial Specifications
Industrial-grade methacrylic acid is normally supplied at an assay of 99% or higher and is stabilised with hydroquinone (HQ) or monomethyl ether hydroquinone (MEHQ) to prevent premature polymerisation during storage and transport. The parameters below are the ones buyers usually confirm on the certificate of analysis before a batch is released.
| Parameter | Typical value, industrial grade |
|---|---|
| CAS number | 79-41-4 |
| Molecular formula | C4H6O2 |
| Molar mass | 86.09 g/mol |
| Appearance | Colourless liquid, becomes crystalline below about 14 °C |
| Assay | 99.0% minimum |
| Crystallisation point | About 14 °C |
| Boiling point | About 161 °C at 101.3 kPa |
| Density at 20 °C | About 1.015 g/cm³ |
| Solubility | Soluble in water, ethanol and ether |
| Stabiliser | Hydroquinone or MEHQ at the ppm level stated on the certificate of analysis |
| Transport classification | UN 2531, Class 8 corrosive liquid, packing group III |
| Harmonised System code | 2916.13 |
How Methacrylic Acid Is Used in Polymers, Coatings and Adhesives
The carbon-carbon double bond and the carboxylic acid group sit on the same small molecule, and that combination is what makes MAA such a useful monomer: the double bond takes part in free-radical polymerisation while the acid group can be esterified or left free to supply carboxyl functionality. The largest single outlet is esterification with methanol to give methyl methacrylate, the monomer that is polymerised into clear acrylic sheet, moulding compounds and acrylic resins. MAA is also copolymerised directly to build emulsion polymers, synthetic rubber, textile treatment agents, paper coatings, water-treatment polymers and a broad family of resin and polymer additives.
When MAA is copolymerised at a few percent, the carboxyl groups it introduces change the behaviour of the whole polymer: they improve adhesion to metal, glass and plastics, raise compatibility with pigments and fillers, and provide the reactive sites used later for crosslinking. These copolymers appear in industrial and architectural emulsion paints, where they contribute hardness, gloss and weather resistance; in pressure-sensitive and laminating adhesives; in dispersants, rheology modifiers and thickeners; and in controlled-release and binder systems for agricultural, paper and construction products.
Grades, Packaging and Supply Checks
Technical or industrial grade is the normal commercial form, while higher-purity distilled grades are reserved for applications where colour, inhibitor residue or trace impurities matter. Before ordering, confirm assay, inhibitor type and concentration, water content, colour and crystallisation behaviour on the specification sheet, and check that the material is delivered in compatible lined steel drums, road tankers or IBCs that are clean, dry and clearly labelled. A certificate of analysis, a safety data sheet and the transport papers for a Class 8 corrosive should accompany every shipment.
Safe Handling and Storage
MAA is corrosive to skin, eyes and the respiratory tract, so it should be handled in closed systems wherever practical, with splash goggles, chemical-resistant gloves and protective clothing, and with ventilation strong enough to keep vapour concentrations low. Because polymerisation is exothermic and self-accelerating once the inhibitor is consumed, keep containers sealed when they are not in use, avoid unnecessary heating, and store the material in a cool, shaded place away from oxidising agents and ignition sources. Check inhibitor levels and product appearance periodically and follow the supplier's guidance on maximum storage temperature and shelf life.
Frequently Asked Questions
Q: What is the CAS number of methacrylic acid?
Methacrylic acid has CAS number 79-41-4 and the molecular formula C4H6O2.
Q: Is methacrylic acid a liquid or a solid?
It is a colourless liquid at room temperature that crystallises below about 14 °C, so it can arrive as a solid in cold weather and must be melted carefully before use.
Q: What is methacrylic acid used for?
Its main use is the production of methyl methacrylate, but it is also copolymerised into coatings, adhesives, synthetic rubber, textile treatment agents, paper coatings and water-treatment polymers.
Q: Is methacrylic acid the same as methacrylate?
No. Methacrylic acid is the free acid, while methacrylates such as methyl methacrylate are its esters, with different reactivity and end uses.
Q: Why does methacrylic acid polymerise on its own?
The molecule contains a reactive double bond, so it polymerises spontaneously unless an inhibitor such as hydroquinone or MEHQ is present at the specified level.
Q: What is the UN number for methacrylic acid?
Methacrylic acid is assigned UN 2531 and is classified as a Class 8 corrosive liquid.
