Knowledge

Is 70% Isopropanol (CAS 67-63-0) Flammable? Safety Guide

Dec 17, 2025 Leave a message

What Is 70% Isopropanol?

Isopropyl alcohol, also called 2-propanol or isopropanol, is one of the most widely used alcohol solvents and disinfectant ingredients. A 70% product is simply the alcohol diluted with purified water so that the alcohol accounts for 70% of the volume and water for the remaining 30%. That ratio is a practical compromise between germicidal effect and handling properties, which is why 70% solutions are a standard item in hospitals, food-processing plants and general cleaning.

Parameter Typical value
Active ingredient Isopropyl alcohol (2-propanol)
CAS number 67-63-0
Molecular formula C3H8O
Composition 70% isopropyl alcohol by volume with 30% purified water
Appearance Clear, colourless liquid
Odour Pungent, characteristic of alcohols
Boiling point of the alcohol About 82.5 °C
Flash point of the alcohol About 12 °C closed cup
Relative density of the alcohol About 0.786
Classification Flammable liquid, hazard category 2
Transport classification UN 1219, Class 3, packing group II

Why 70% Isopropanol Is Still a Flammable Liquid

Diluting alcohol with water does not make the product non-flammable. 70% isopropanol is classified as a category 2 flammable liquid, and the alcohol vapour above the liquid can form a combustible mixture with air at ordinary room temperature, so it ignites readily on contact with a flame, a hot surface or a static spark. Water raises the flash point of the mixture relative to the pure alcohol, but the diluted solution still flashes well below 30 °C under closed-cup conditions. Sprayed mists, large spills and vapour collecting in a confined space are the situations that need the most care, and containers should stay sealed to limit evaporation.

Disinfection and Everyday Industrial Uses

The dominant use of 70% isopropanol is disinfection and antisepsis. Hospitals and clinics use it to wipe skin before injections and to clean the surfaces of medical devices, while households and offices use it on door handles, desktops and electronic equipment. Because it evaporates quickly and leaves no residue, it suits precision instruments, screens and electronic assemblies, provided that liquid is not allowed to run into openings or connectors. Beyond surface disinfection, the same concentration is used to compound alcohol-based hand rubs, to disinfect work surfaces in pharmaceutical cleanrooms, to clean food-processing equipment, and in industrial maintenance and printing as a solvent for oils and ink residues.

Health Risks, Storage and Safe Handling

70% isopropanol irritates the eyes and may cause pain and redness after contact, and inhaling the vapour in a poorly ventilated room can cause dizziness, drowsiness and reduced concentration. Swallowing the liquid can cause severe, potentially life-threatening poisoning, so it must be kept away from food, drinks and children. Operators should wear protective gloves and goggles and avoid direct skin contact and vapour inhalation; if the product is swallowed, seek medical help immediately and do not induce vomiting, because the liquid can be drawn into the airways and cause further injury. Store it in a cool, dry, well-ventilated area away from flames, sparks and oxidising agents, keep containers sealed and hazard-labelled, and use approved flammable-liquid cabinets with fire-extinguishing equipment for bulk quantities. Disconnect electrical equipment before cleaning so that vapour cannot meet a spark, and dispose of waste liquid under hazardous-waste rules.

Frequently Asked Questions

Q: Is 70% isopropanol flammable?
Yes. It is a category 2 flammable liquid, and its vapour can ignite on contact with a flame, a static spark or a hot surface, so use and storage must keep it away from ignition sources.

Q: Why is 70% alcohol preferred over 100% for disinfection?
The water in the 70% solution lets the alcohol denature microbial proteins more completely and slows evaporation, so the liquid stays in contact with the surface for longer.

Q: What is the CAS number of 70% isopropanol?
The active ingredient is isopropyl alcohol, CAS 67-63-0, formula C3H8O; the 70% product is that alcohol diluted with purified water by volume.

Q: What should be done if 70% isopropanol is swallowed?
Seek medical help immediately and do not induce vomiting, because vomited liquid can enter the airways and worsen the poisoning.

Q: Can 70% isopropanol clean electronic screens?
Yes. It evaporates quickly and does not corrode most screen surfaces, but liquid must not be allowed to run into openings or internal connectors.

Q: How should 70% isopropanol be stored?
In a cool, ventilated place away from flames, sparks and oxidisers, with containers sealed and labelled, and bulk quantities held in approved flammable-liquid cabinets with fire-extinguishing equipment.

Send Inquiry