What Methylene Chloride (DCM) Is
Methylene chloride, also known as dichloromethane or DCM, is a chlorinated organic solvent with the molecular formula CH2Cl2 and the CAS number 75-09-2. It is a clear, colourless, volatile liquid with a mildly sweet, penetrating odour and a boiling point of about 40 °C. It is non-flammable under normal handling conditions, and it dissolves a very wide range of organic materials, which is why paint stripping, degreasing, adhesive formulation and extraction have historically depended on it.
DCM also forms naturally in small amounts through marine algae, wetlands and volcanic activity. Commercial demand, however, is met almost entirely by manufactured material, supplied to defined purity specifications and delivered in steel drums, intermediate bulk containers, ISO tanks and road tankers.
Is Methylene Chloride Healthy? The Health Risk Profile
No. Methylene chloride is not healthy and should never be described as a low-risk material. The International Agency for Research on Cancer classifies it as a Group 2A agent, meaning it is probably carcinogenic to humans; that classification reflects evidence linking exposure to tumours of the lung, liver and pancreas. No exposure threshold has been established below which all risk can be assumed to disappear, so occupational exposure should be kept as low as reasonably achievable.
The acute hazard is just as significant. After inhalation or skin absorption, DCM is metabolised in the body into carbon monoxide, which binds to haemoglobin far more strongly than oxygen does and reduces the oxygen-carrying capacity of the blood. Early signs of overexposure include headache, dizziness, fatigue, nausea and confusion. At very high concentrations the effect can be fatal, and because the metabolic route is saturable and the compound accumulates in body fat, carbon monoxide can continue to build up in the blood well after the worker has left the workstation.
Typical Physical and Chemical Data
| Parameter | Value |
|---|---|
| CAS number | 75-09-2 |
| Molecular formula | CH2Cl2 |
| Appearance | Clear, colourless volatile liquid |
| Odour | Sweet, penetrating |
| Boiling point | About 40 °C |
| Flammability | Non-flammable in normal use |
Occupational Exposure Limits and Regulatory Status
Workplace exposure is regulated in most industrial economies, but the numerical limits differ considerably between jurisdictions, and local law always takes precedence over generic guidance.
| Market | Limit type | Value |
|---|---|---|
| United States (OSHA) | 8-hour time-weighted average permissible exposure limit | 25 ppm |
| European Union | Indicative 8-hour occupational exposure limit value | 100 ppm |
| Industrial good practice | Internal control target | Lowest level reasonably practicable |
For orientation, 25 ppm of DCM equals approximately 87 mg/m3 when converted at 25 °C and 101.3 kPa using a molar volume of 24.45 L/mol; the European indicative value of 100 ppm corresponds to roughly 347 mg/m3 on the same basis. Several national authorities and professional bodies recommend control values below the regulatory ceiling, and regulators in the United States and the European Union have banned or restricted the sale of DCM-based paint strippers to consumers following fatalities caused by domestic use. Industrial applications are being reassessed wherever technically viable alternatives exist, and buyers should verify that the intended end use is lawful in the destination market before ordering.
How Exposure Actually Happens
Because DCM evaporates rapidly, inhalation of vapour is the dominant exposure route, particularly in confined or poorly ventilated areas where vapour is heavier than air and collects at low level. Skin contact with the liquid causes irritation and permits absorption straight through intact skin. Contaminated surfaces, tools and clothing extend exposure long after the task has ended, and since odour is not a reliable indicator of concentration, personal or area air monitoring is the only dependable way to confirm that controls are working.
Engineering Controls and Safe Handling Precautions
Run all operations in closed systems equipped with local exhaust ventilation, and verify capture efficiency by measurement rather than by smell.
Train operators on the specific hazards of DCM, including the carbon monoxide mechanism, before they handle the material.
Supply chemical-resistant gloves, safety goggles or a face shield, and respiratory protection whenever measured air levels exceed the applicable limit.
Keep process areas physically separate from eating, drinking and smoking zones, and provide emergency eyewash and safety shower facilities within easy reach.
Use grounded, closed containers with correct labelling; store away from strong oxidisers, aluminium and other reactive metals.
Dispose of waste solvent through licensed routes, and never discharge it to drains or open ground.
Alternatives and Risk Reduction
For many paint removal, cleaning and extraction duties, technically adequate alternatives already exist, including aqueous cleaning systems, benzyl alcohol based strippers and other lower-toxicity solvents. Where DCM remains the only viable option, a structured management programme should combine a formal substitution assessment, engineering controls, validated monitoring, health surveillance and written safe work procedures.
From a procurement perspective, buyers should request a current safety data sheet for every batch, confirm the declared assay and water content, check that packaging and transport documentation comply with dangerous goods rules, and retain traceability of the production lot.
Frequently Asked Questions
Q: Is methylene chloride safe for humans?
No. It is probably carcinogenic to humans and can also cause acute effects such as dizziness, headache and dangerous carbon monoxide accumulation in the blood at high exposure.
Q: Why is methylene chloride dangerous?
The body converts DCM into carbon monoxide, while long-term exposure is associated with cancer risk, so strict control of vapour and skin contact is essential.
Q: What is the CAS number of methylene chloride?
The CAS number is 75-09-2, and the molecular formula is CH2Cl2.
Q: Can methylene chloride be used at home?
Consumer paint stripping with DCM-based products is banned or restricted in the United States and the European Union because of severe health risks.
Q: Is dichloromethane the same as methylene chloride?
Yes. Dichloromethane is the systematic name and methylene chloride is the common name for the same compound.
Q: How can workers be protected from DCM exposure?
Use closed systems with exhaust ventilation, wear chemical-resistant gloves and eye protection, monitor airborne levels, and follow the supplier safety data sheet.
