Knowledge

Is n-Hexane a Solvent? Properties, Uses and Sourcing Guide for CAS 110-54-3

Sep 22, 2025 Leave a message

n-Hexane is the workhorse nonpolar solvent of the edible oil and rubber industries, and buyers who search for it usually need two answers at once: what makes it an effective solvent, and how to source a grade that meets the specification and compliance requirements of the destination market. This guide covers the properties that matter, the main applications, the occupational health issue that governs handling, and the documents a purchasing team should verify before shipment.

What Is n-Hexane?

n-Hexane is a straight-chain saturated hydrocarbon with the molecular formula C6H14 and CAS number 110-54-3. It is a colourless, highly volatile liquid with a faint gasoline-like odour, produced mainly by fractional distillation of crude oil and by processing of natural gas condensate. The linear structure, with no branching and no functional group, makes the molecule strongly nonpolar and gives it one of the highest selectivities among common aliphatic solvents for oils, fats, and waxes.

CAS number 110-54-3
Molecular formula C6H14
Molar mass 86.18 g/mol
Appearance Colourless volatile liquid
Boiling point 68.7 °C
Melting point -95 °C
Flash point -22 °C closed cup
Density at 20 °C 0.659 g/cm3
Vapour pressure at 20 °C about 17 kPa
Water solubility Practically insoluble
UN number 1208, flammable liquid

Why Is n-Hexane an Effective Solvent?

n-Hexane is a classic nonpolar solvent. It is immiscible with water but fully miscible with vegetable oils, animal fats, waxes, terpenes, and most other organic liquids. Extraction works on the principle of like dissolving like: the hydrocarbon chain has a high affinity for lipid molecules, while the strongly polar water phase is rejected. Because the two liquids separate cleanly, the loaded hexane can be drawn off and the oil recovered without emulsification problems.

Two further properties explain its dominance in oilseed processing. First, the low boiling point means the solvent can be stripped from the crude oil and recovered by distillation with modest energy input, and the recovered hexane is recycled. Second, the narrow boiling range of a well-cut commercial grade allows consistent recovery and low residue in the finished oil. Low viscosity also improves penetration into the seed flakes and speeds percolation through the extraction bed.

Main Industrial Applications

Vegetable oil extraction: Extracting soybean, rapeseed, sunflower, cottonseed, and rice bran oil, where hexane dissolves the oil and is then removed by evaporation and stripping.

Adhesives and rubber: Solvent for rubber-based adhesives, contact cements, and shoe and tyre compounds, where fast evaporation is needed.

Printing inks and coatings: Carrier solvent and diluent in rotogravure and flexographic inks.

Precision cleaning: Degreasing of metal parts and electronic components where a residue-free nonpolar cleaner is required.

Polymerisation and pharmaceuticals: Reaction and purification medium, including use as a crystallisation solvent and as a carrier for olefin polymerisation catalysts.

Analytical chemistry: Extraction and elution solvent in laboratories, and a common calibration standard for gas chromatography.

Health, Safety and Occupational Exposure Limits

n-Hexane is a flammable liquid, and its vapour is heavier than air, so accumulation in pits, sumps, and low-lying areas is a real risk. The more distinctive hazard is neurotoxicity. n-Hexane is metabolised in the body to 2,5-hexanedione, a metabolite that damages the peripheral nerves. Prolonged occupational overexposure causes sensorimotor peripheral neuropathy, typically starting with numbness and tingling in the feet and hands, and in severe cases progressing to weakness and gait disturbance. Recovery after removal from exposure is slow and may be incomplete, which is why exposure control is treated as a design requirement rather than an operational preference.

OSHA PEL, United States 500 ppm as an 8-hour time-weighted average
ACGIH TLV-TWA 50 ppm as an 8-hour time-weighted average, skin notation
NIOSH REL 50 ppm as a 10-hour time-weighted average
GHS hazard classes Flammable liquid category 2, reproductive toxicity category 2, specific target organ toxicity repeated exposure category 2, aspiration hazard category 1
Chemical specification reference ASTM D1836, Standard Specification for Commercial Hexanes

Grades, Purity and Regulatory Compliance

Commercial hexane is not a single compound. Extraction-grade material is a narrow-boiling cut that contains n-hexane together with isomers and cycloparaffins in the C6 range, while a technical or reagent grade may be specified on n-hexane content alone. Buyers should therefore define the specification by the application: extraction grades are typically specified by distillation range, colour, sulphur content, and non-volatile residue, whereas analytical grades are specified by assay and by chromatographic purity.

Because hexane is used to produce food ingredients, the grade supplied for oilseed extraction must also comply with the extraction solvent purity rules of the destination market, including limits on aromatic residues and on heavy metals, and it must be supplied with documentation showing conformity. Industrial grades that have not been qualified as food-contact extraction solvents must not be used for edible oil processing.

Sourcing Checklist for n-Hexane Buyers

Specification match: Confirm assay or distillation range, water content, benzene and aromatic limits, sulphur, and non-volatile residue against the process requirement.

Batch documentation: Certificate of analysis per batch, safety data sheet in the required language, and transport documentation for dangerous goods.

Packaging and logistics: Drums, ISO tanks, or tanker delivery, with correct UN 1208 labelling and placarding, and a documented clean-in-place history for reusable containers.

Supply reliability: Demonstrated batch-to-batch consistency, production capacity, stock buffer, and lead time that supports continuous extraction campaigns.

Regulatory fit: Hazardous chemical registration, import licensing, and local labelling rules in the destination country, plus food-contact conformity where the use requires it.

Traceability: Retained samples, lot numbering, and a route to technical support for residue or recovery problems at the plant.

Frequently Asked Questions

Q: Is n-hexane a solvent?
Yes. n-Hexane is a nonpolar aliphatic solvent used at large scale for oilseed extraction and in adhesives, inks, precision cleaning, and analytical chemistry.

Q: What is the CAS number of n-hexane?
The CAS number of n-hexane is 110-54-3, its molecular formula is C6H14, and its molar mass is 86.18 g/mol.

Q: What is n-hexane used for?
Its largest use is extracting vegetable oil from oilseeds such as soybean and rapeseed, followed by rubber-based adhesives, printing inks, parts cleaning, polymerisation, and laboratory analysis.

Q: Is n-hexane dangerous?
It is a flammable liquid, and repeated overexposure to its vapour can damage peripheral nerves through the metabolite 2,5-hexanedione, so closed systems, ventilation, and strict exposure limits are required.

Q: Is n-hexane soluble in water?
No. It is practically insoluble in water but miscible with oils, fats, and most nonpolar organic solvents, which is the basis of its use in extraction.

Q: What documents should a hexane buyer request?
Request a batch certificate of analysis, the safety data sheet, dangerous goods transport documentation, and evidence of food-contact or extraction-solvent conformity where the application requires it.

Q: What is the workplace exposure limit for n-hexane?
OSHA sets a permissible exposure limit of 500 ppm as an 8-hour time average, while ACGIH and NIOSH recommend 50 ppm, with a skin notation that requires protection against dermal absorption.

Send Inquiry