What Is Triethylene Glycol (TEG)?
Triethylene glycol, abbreviated TEG, is a clear, colourless, odourless and hygroscopic liquid with the molecular formula C6H14O4, a molar mass of 150.17 g/mol and the CAS number 112-27-6. It is a diol, meaning the molecule carries two hydroxyl groups, and it belongs to the polyethylene glycol family: three ethylene oxide units are joined in a straight chain with a hydroxyl group at each end. TEG is fully miscible with water and with many organic solvents, and its atmospheric boiling point of about 285 °C makes it suitable for processes that operate at elevated temperature.
The two hydroxyl groups give TEG strong hydrogen bonding, which explains its hygroscopic behaviour, its low vapour pressure and its ability to absorb water vapour from gas streams. The two ether linkages contribute solvent power for a wide range of organic compounds.
Is Triethylene Glycol Organic?
In the chemical sense the answer is yes. TEG is a carbon-based molecule built from carbon-hydrogen, carbon-oxygen and oxygen-hydrogen bonds, which is exactly what the term organic means in chemistry. Compounds containing carbon and hydrogen are described as organic compounds, and triethylene glycol qualifies without exception.
The confusion arises because the word organic has a second, unrelated meaning in food and consumer marketing, where it refers to certified agricultural production methods and permitted ingredient lists. TEG is not and cannot be an organic-certified food ingredient, so the certification meaning simply does not apply to it. When a buyer asks whether triethylene glycol is organic, the accurate answer is that the compound is organic in the chemical sense, while organic certification is irrelevant to industrial glycols. For procurement purposes the documents that matter are the technical data sheet, the certificate of analysis and the applicable purity specification.
TEG Compared with MEG and DEG
| Property | Monoethylene glycol | Diethylene glycol | Triethylene glycol |
|---|---|---|---|
| Molecular formula | C2H6O2 | C4H10O3 | C6H14O4 |
| CAS number | 107-21-1 | 111-46-6 | 112-27-6 |
| Ethylene oxide units | 1 | 2 | 3 |
| Boiling point at 101.3 kPa | about 197 °C | about 245 °C | about 285 °C |
| Viscosity and hygroscopicity | Lowest | Intermediate | Highest |
| Acute toxicity if swallowed | High, nephrotoxic | Moderate to high | Low to moderate |
| Typical main use | Polyester fibre and antifreeze | Polyester resins and solvents | Natural gas dehydration |
The growing chain length reduces volatility and acute toxicity while increasing viscosity and boiling point, which is why the three glycols are not interchangeable and why TEG dominates high-temperature dehydration service.
Typical Physical Properties
| Property | Typical value |
|---|---|
| Appearance | Clear, colourless, odourless viscous liquid |
| Molecular formula | C6H14O4 |
| Molar mass | 150.17 g/mol |
| Density at 20 °C | approx. 1.124 g/cm3 |
| Melting point | approx. -7 °C |
| Boiling point at 101.3 kPa | approx. 285 °C |
| Flash point | approx. 165 to 177 °C |
| Vapour pressure at 20 °C | below 0.01 mmHg |
| Relative vapour density | approx. 5.2, air equals 1 |
| Solubility | Miscible with water and alcohols, slightly soluble in ether, insoluble in petroleum ether |
Main Industrial Uses
Natural gas dehydration: TEG is the standard liquid desiccant in glycol dehydration units. Wet gas is contacted counter-currently with lean TEG, which absorbs water vapour and delivers a dry gas stream with a controlled dew point, preventing hydrate formation and internal corrosion of pipelines.
Solvent applications: TEG dissolves a broad range of organic substances and is used as a process solvent, a carrier and a coupling agent in formulations where low volatility is required.
Humectant: in printing inks, textile processing and paper treatment, TEG holds moisture and keeps substrates flexible, especially in low-humidity environments.
Brake fluids and lubricants: TEG is a component of hydraulic brake fluid formulations and of some lubricant and hydraulic fluids, where its high boiling point and water tolerance are valuable.
Plasticisers and resins: TEG serves as an intermediate in unsaturated polyester resins, polyurethane systems and plasticiser manufacture.
Air treatment: because it is hygroscopic and has very low volatility, TEG is used in air dehumidification equipment and as a carrier in air-treatment formulations.
Grades, Supply and Quality Parameters
Industrial TEG is supplied to a typical specification of 99.0 percent minimum purity, water content of 0.1 percent maximum, low colour expressed in APHA units and low acidity expressed as acetic acid. Purity and water content are usually verified by gas chromatography and Karl Fischer titration, and each batch is delivered with a certificate of analysis. Moisture pickup must be controlled during sampling, because a damp sample will read high on water and can mislead dehydration calculations.
Standard packaging includes 230 kg steel drums, 1000 L intermediate bulk containers, ISO tanks and bulk road tankers. Carbon steel and stainless steel are both suitable for storage and transfer; aluminium and galvanised surfaces should be avoided where moisture is present. Tanks should be kept sealed, fitted with a nitrogen blanket for long-term storage and shielded from direct sunlight and heat sources.
Handling, Toxicology and Storage
Triethylene glycol has low to moderate acute toxicity compared with other glycols. It is a mild skin and eye irritant, and breathing its vapours or mists may cause irritation of the respiratory tract or drowsiness, so work in well-ventilated areas. Extremely high chronic doses have been linked to organ effects in animal studies, but such exposure levels are not reached in normal industrial handling.
TEG is not intended for consumption and must be kept away from children, food and drinking water. Wear chemical gloves and safety goggles when handling large volumes, use local exhaust ventilation where mists can form, and wash contaminated clothing before reuse. Spills should be absorbed with inert material, prevented from entering drains or waterways, and disposed of in accordance with local regulations. Store in sealed, labelled containers in a cool, dry and well-ventilated area away from strong oxidising agents.
Frequently Asked Questions
Q: Is triethylene glycol organic?
Yes. TEG is an organic compound in the chemical sense because it is carbon-based with carbon-hydrogen bonds. It has no relation to organic certification used for food products.
Q: What is the CAS number of triethylene glycol?
The CAS number of triethylene glycol is 112-27-6 and its molecular formula is C6H14O4.
Q: Is TEG the same as ethylene glycol?
No. TEG contains three ethylene oxide units while ethylene glycol contains one. TEG has a much higher boiling point and far lower acute toxicity.
Q: What is triethylene glycol used for?
TEG is mainly used to dehydrate natural gas, and it also serves as a solvent, humectant, brake fluid component and plasticiser intermediate.
Q: Is triethylene glycol toxic?
TEG has low to moderate toxicity. It is a mild skin and eye irritant and its vapours can irritate the respiratory tract, but it is considerably less hazardous than ethylene glycol.
Q: What is the boiling point of TEG?
The atmospheric boiling point is about 285 °C, which is much higher than that of ethylene glycol and supports its use in high-temperature dehydration service.
