Short Answer: TEG Costs More Than Ethylene Glycol
Triethylene glycol (TEG, CAS 112-27-6) is generally more expensive than ethylene glycol (EG or MEG, CAS 107-21-1) on a per-metric-ton basis. In the glycol family, monoethylene glycol has the lowest cost per ton, followed by diethylene glycol (DEG, CAS 111-46-6), with triethylene glycol at the top of the price range. This hierarchy reflects production economics: EG is the main product of ethylene oxide hydration, while DEG and TEG are higher oligomers produced in smaller quantities as co-products.
Why Ethylene Glycol Costs Less
Several structural factors explain the price difference:
Economies of scale - MEG is one of the highest-volume organic chemicals worldwide, driven by polyester (PET) fibre and resin demand, which keeps unit costs low.
Production ratio - DEG and TEG form in fixed ratios during ethylene oxide hydration; their supply is limited by EG output, so they rarely enjoy the same oversupply-driven pricing.
Derivative demand - TEG is consumed in higher-value niches such as natural gas dehydration and speciality solvents, supporting a structural price premium.
Actual prices fluctuate with feedstock (ethylene, energy), regional supply-demand balance, logistics and currency movements, so buyers should compare current offers rather than rely on fixed price assumptions.
TEG vs EG: Properties Comparison
| Parameter | Ethylene glycol (MEG) | Triethylene glycol (TEG) |
|---|---|---|
| CAS number | 107-21-1 | 112-27-6 |
| Molecular formula / weight | C2H6O2 / 62.07 g/mol | C6H14O4 / 150.17 g/mol |
| Boiling point | ≈197 °C | 285–295 °C |
| Flash point (closed cup) | ≈111 °C | ≈177 °C |
| Main applications | PET fibre and resin, antifreeze, coolants | Gas dehydration, plasticisers, solvents, humectants |
| Typical price position | Lowest in glycol family | Higher than EG and DEG |
Which One Should You Buy?
Choose MEG when you need bulk antifreeze, polyester intermediates or large-volume coolant formulations where cost per ton dominates. Choose TEG when you need a low-volatility, high-boiling hygroscopic fluid - for example in natural gas dehydration contactors, as a plasticiser or solvent, or in applications where vapour losses must be minimised at elevated temperatures. The two are not interchangeable in most processes, so base the decision on technical fit first and price second.
How to Buy TEG and EG in Bulk
Specify the product, grade and purity (for example industrial TEG ≥99.0% or fibre-grade MEG), the packaging format (drums, IBC totes, ISO tank or flexitank) and the destination port. Request a batch COA covering purity by gas chromatography, water by Karl Fischer titration, acidity and colour, plus the SDS. Confirm the lead time and payment terms in writing, and work with suppliers that maintain documented quality systems aligned with ISO 9001:2015.
Frequently Asked Questions
Is TEG cheaper than ethylene glycol? No. TEG is generally priced higher than MEG per metric ton because it is a lower-volume co-product with higher-value niche demand.
Why is TEG more expensive than MEG? MEG enjoys massive economies of scale from PET demand, while DEG and TEG are formed in smaller, fixed ratios as co-products and serve smaller, more specialised markets.
Can TEG be substituted for ethylene glycol? Not generally. TEG and MEG differ in boiling point, volatility, viscosity and solvency; substitution requires re-engineering of the process, for example the glycol loop in dehydration units.
What is TEG mainly used for? TEG is the standard desiccant for natural gas dehydration and is also used in plasticisers, lubricants, solvents, humectants and speciality chemical applications.
What affects TEG prices? Ethylene and energy feedstock costs, regional supply-demand balance, shipping and container availability, exchange rates and the purity grade all influence TEG pricing.
How should I request a price for TEG or EG? Send your grade, purity, monthly volume, packaging preference and destination port; a firm offer should include the COA specification, delivery time and payment terms.
