What Methacrylic Acid CAS 79-41-4 Is
Methacrylic acid, abbreviated MAA, is an organic carboxylic acid with the molecular formula C4H6O2, a molecular weight of 86.09 and the CAS registry number 79-41-4. Its HS code is 2916.13. At room temperature the pure product can appear as a colourless liquid or as low-melting crystals, and it has the sharp, pungent odour typical of short-chain organic acids. It dissolves readily in warm water and is miscible with most organic solvents such as alcohols, ketones, esters and ethers. Two functional groups in one small molecule explain its value: a carboxylic acid group that provides acidity and reactivity, and a carbon-carbon double bond that allows the monomer to polymerise.
Physical and Chemical Properties
| Property | Typical value |
|---|---|
| CAS number | 79-41-4 |
| Molecular formula | C4H6O2 |
| Molecular weight | 86.09 g/mol |
| Appearance | colourless liquid or crystals |
| Melting range | about 12-16 °C depending on purity; the pure product melts near 14 °C |
| Boiling point | about 161-163 °C at standard pressure |
| Density | about 1.015 g/cm3 at 25 °C |
| Acid strength | pKa about 4.66 |
| Flash point | about 77 °C |
| Solubility | readily soluble in water; miscible with alcohols, ketones and esters |
| Transport | UN 2531, corrosive liquid, class 8 |
The melting range quoted by different suppliers varies because small amounts of water or acrylic acid depress the freezing point; this is why two data sheets can legitimately show 12 °C and 15 °C for the same material. Density and the acid value are the two measurements most often used to confirm identity and dryness in a receiving laboratory, and the acid value can be converted directly into an equivalent MAA content.
Commercial Specification and Purity Grades
Methacrylic acid is traded in technical and high-purity grades. Technical grade is normally 99.0 % or higher and is used where colour is not critical; high-purity grade is supplied at 99.5 % or higher with tight limits on water, colour and metal ions for optical, medical and high-performance applications.
| Specification item | High-purity grade |
|---|---|
| Assay (GC) | 99.5 % minimum |
| Water content | 0.05 % maximum |
| Colour | 10 Hazen (Pt-Co) maximum |
| Density at 25 °C | 1.010-1.020 g/cm3 |
| Polymerisation inhibitor | MEHQ, typically about 200 mg/kg |
| Appearance | clear, colourless, free from mechanical impurities |
| Typical impurities controlled | acetic acid, propionic acid, metal ions |
Every batch is released against these indicators because they determine how the monomer behaves downstream. Water and metal ions disturb polymerisation kinetics and can tint the finished resin, acetic and propionic acid affect odour and corrosion, and the inhibitor level decides both shelf life and the amount of initiator needed at the reactor.
Inhibitor Management, Storage and Transport
Methacrylic acid polymerises readily when warmed or exposed to initiators, so it is always supplied inhibited. MEHQ is the usual inhibitor, and it needs dissolved oxygen to work effectively; storage vessels are therefore kept under an air atmosphere rather than an inert nitrogen blanket, and the inhibitor and dissolved oxygen levels are checked periodically. Tanks should be kept cool, shaded from direct sunlight and away from heat sources, peroxides, strong oxidising agents, alkalis and rust, which can all trigger or accelerate polymerisation.
The substance is classified as corrosive with UN number 2531 and hazard class 8. It causes severe skin burns and serious eye damage, so chemical goggles, face protection, gloves and acid-resistant clothing are required for any transfer or sampling operation. Packaging must remain sealed to prevent evaporation and moisture pickup, and transport documentation must carry the corrosive label. Where the material is held for long periods, temperature monitoring and a defined maximum storage time protect both product quality and drum integrity.
Main Industrial Applications
Polymers and resins - polymerisation of MAA gives polymethacrylic acid and its salts, while its esters, above all methyl methacrylate, are the route to polymethyl methacrylate, a resin valued for clarity and weather resistance in coatings, adhesives and cast acrylic sheet.
Coatings and inks - MAA raises hardness, adhesion, gloss and scratch resistance in acrylic and polyester systems, and its esters form the backbone of radiation-curable UV coatings and printing inks.
Ion-exchange and water treatment - carboxyl groups in the polymer chain provide the ion-exchange sites used in water softening and demineralisation resins.
Dispersants and additives - MAA copolymers act as pigment dispersants, scale inhibitors and lubricant additives, including pour-point depressants for lubricating oils.
Textile auxiliaries - copolymers are used as sizing agents and finishing aids that improve dimensional stability and hand feel.
Concrete admixtures - polycarboxylate superplasticisers made from MAA derivatives improve flowability, reduce water demand and raise the final strength of high-performance concrete.
Frequently Asked Questions
Q: What is the HS code of methacrylic acid?
The HS code is 2916.13, which covers methacrylic acid and its salts.
Q: Is methacrylic acid corrosive?
Yes. It is classified as a corrosive liquid under UN 2531, hazard class 8, and causes serious skin and eye damage, so protective equipment is required.
Q: Why does methacrylic acid contain an inhibitor?
The molecule carries a carbon-carbon double bond and tends to self-polymerise during storage and transport, so an inhibitor such as MEHQ is added to suppress the reaction and extend shelf life.
Q: Is methacrylic acid the same as acrylic acid?
No. MAA has an extra methyl group on the double bond, which makes its polymers stiffer, more heat resistant and more hydrophobic than those made from acrylic acid.
Q: Is methacrylic acid soluble in water?
Yes. It dissolves readily in warm water and is miscible with most organic solvents, though like many organic acids its solubility in cold water is lower.
Q: What is methacrylic acid mainly used for?
It is used to make methacrylate monomers and polymers for coatings, acrylic sheet, adhesives, ion-exchange resins, dispersants, textile auxiliaries and concrete superplasticisers.
