Knowledge

Adipic Acid Powder (CAS 124-04-9): Production, Applications and Handling

Jun 11, 2025 Leave a message

What Adipic Acid Powder Is

Adipic acid, CAS 124-04-9, is a white crystalline dicarboxylic acid with the molecular formula C6H10O4 and a molecular weight of 146.14 g/mol. It is the most important dicarboxylic acid from an industrial standpoint and is manufactured in large volume as the main precursor for nylon 66. The commercial grade is a free-flowing white powder or granular solid with a melting point near 152 °C and a solubility in water of roughly 1.4 g per 100 mL at 15 °C; it also dissolves in alcohols and acetone. Adipic acid rarely occurs in nature and is produced synthetically on a scale of about 2.5 million tonnes a year.

How Adipic Acid Is Produced

Almost all commercial adipic acid starts from cyclohexane, which is obtained by the hydrogenation of benzene. The cyclohexane is oxidised with air to a mixture of cyclohexanol and cyclohexanone, and this mixture is then oxidised further with nitric acid to give adipic acid. The nitric acid stage produces nitrous oxide, a potent greenhouse gas, so modern plants are fitted with abatement systems that decompose or recover the off-gas.

Alternative production routes based on phenol hydrogenation and on renewable feedstocks are used or under development, but the cyclohexane oxidation route still accounts for the great majority of global capacity because of its scale and cost position.

Main Applications

Nylon 66: adipic acid reacts with 1,6-hexamethylenediamine to form nylon salt, which is polycondensed into the polymer used in engineering plastics, fibres, tyre cord and industrial yarns. Roughly 90 % of consumption serves this outlet.

Polyester polyols: adipate esters give flexibility and hydrolysis resistance to polyurethane coatings, elastomers and foams.

Plasticisers and lubricants: diesters such as di-2-ethylhexyl adipate act as low-temperature plasticisers for PVC and as synthetic lubricant base stocks.

Food applications: adipic acid and its derivatives serve as acidulant, gelling aid, flavour component, leavening aid and buffering agent in certain foods, and carry the additive number E355.

Other industrial uses: intermediates for pesticides, dyes, textile treatment agents and pharmaceutical products, plus unsaturated polyester resins and adhesives.

Safety, Storage and Handling

Adipic acid has low acute oral toxicity, with rat LD50 values reported in the thousands of milligrams per kilogram, and it is not classified as carcinogenic. It is readily biodegradable and shows low environmental toxicity, so the main workplace concerns are physical rather than chemical: fine powder forms a nuisance dust that can irritate the respiratory tract and eyes, and repeated skin contact may cause mild irritation.

Use gloves and eye protection, and provide adequate ventilation or dust extraction at transfer points.

Avoid generating airborne dust clouds, and clean up spills promptly with suitable equipment.

Store in a dry, cool, well-ventilated area with containers closed between use.

Keep the material away from moisture and strong oxidisers, and off damp floors to prevent caking.

Follow the safety data sheet issued with each shipment for first-aid and disposal advice.

Buying and Quality Considerations

Adipic acid is offered as a fine powder, a granular grade and a polymer-grade material, and food applications call for a grade that meets the applicable national food additive specification. Buyers should confirm assay, normally 99.5 % minimum, together with moisture, ash, colour and iron content, and should require a certificate of analysis for every lot.

Packaging options include 25 kg bags, 500 kg and 1000 kg jumbo bags, palletised loads and, at scale, tanker deliveries of molten product to sites that have heated storage. A consistent particle size distribution and low dust generation reduce handling losses and improve dosing accuracy in continuous polymerisation plants, while tight moisture control protects the free-flowing behaviour of the powder during storage.

Frequently Asked Questions

Q: What is adipic acid used for?
It is used mainly to produce nylon 66, and also in polyester polyols, plasticisers, lubricants, food additives and pharmaceutical intermediates.

Q: What is the formula and CAS number of adipic acid?
The molecular formula is C6H10O4 and the CAS number is 124-04-9.

Q: Is adipic acid safe to handle?
It has low acute toxicity, but dust may irritate the respiratory tract and skin, so gloves, eye protection and ventilation are recommended.

Q: Is adipic acid used in food?
Yes, it is used as an acidulant, gelling aid, flavour component, leavening aid and buffering agent in certain foods and carries the additive number E355.

Q: How is adipic acid produced?
It is made from cyclohexane, obtained by hydrogenating benzene, through air oxidation to cyclohexanol and cyclohexanone followed by nitric acid oxidation.

Q: Is adipic acid biodegradable?
Yes, it is readily biodegradable with low environmental toxicity, although dust control remains important in the workplace.

Q: Why does adipic acid powder cake?
Moisture uptake and compression during storage can cause caking, so bags and bulk containers should be kept sealed, dry and off damp floors.

Send Inquiry