What Is Another Name for p-Xylene?
p-Xylene (CAS 106-42-3) is also known as para-xylene, 1,4-dimethylbenzene, p-xylol, 1,4-xylene and p-dimethylbenzene. The "p" stands for para, meaning the two methyl groups on the benzene ring are positioned opposite each other, at the 1- and 4-positions. These names are fully interchangeable in technical documents, SDS files and purchase specifications, so buyers should always confirm the CAS number 106-42-3 to avoid confusion with the ortho (95-47-6) and meta (108-38-3) isomers.
p-Xylene Specifications (CAS 106-42-3)
| Parameter | Value |
|---|---|
| CAS number | 106-42-3 |
| Molecular formula | C8H10 |
| Molecular weight | 106.17 g/mol |
| Boiling point | 138.4 °C |
| Melting point | 13.3 °C |
| Flash point (closed cup) | About 25 °C |
| Density at 20 °C | 0.861 g/cm³ |
| Appearance | Colorless clear liquid at ambient temperature |
| Typical purity | 99% min, up to 99.5% or higher |
| UN number / class | UN 1307, Class 3, Packing Group III |
| HS code | 2902430000 |
| EINECS number | 203-396-5 |
One handling detail matters: p-xylene melts at 13.3 °C, close to typical warehouse temperatures. In cold weather it can solidify, so storage and transfer lines may need heating or insulation to keep the product fluid.
What Is p-Xylene Used For?
PTA and PET production. Roughly 98% of the world's p-xylene is oxidized to purified terephthalic acid (PTA) or dimethyl terephthalate (DMT), which are then polymerized with ethylene glycol to make polyethylene terephthalate (PET). PET is the raw material for plastic bottles for water and carbonated drinks, food packaging trays, and polyester fibers and textiles. Because of this chain, p-xylene is one of the most important aromatic building blocks of the global petrochemical industry.
Solvent applications. Smaller volumes of p-xylene, usually within mixed-xylene streams, are used as solvents in paints, inks, agrochemicals and cleaning products, where its slow evaporation and strong solvency are useful.
Chemical intermediates. Beyond PTA, p-xylene is used to produce other para-substituted aromatics for dyes, pharmaceuticals and specialty chemicals.
Purity Grades and Quality Control
Commercial p-xylene is typically supplied at 99% minimum purity, with premium grades above 99.5%. Because p-xylene is separated from its isomers by crystallization or adsorption, buyers use the melting point and isomer impurity profile as key quality indicators: higher purity raises the solidification point toward the theoretical 13.3 °C. Always request a lot-specific Certificate of Analysis (COA) confirming purity, isomer content and moisture when placing orders.
Safety and Handling
p-Xylene is a flammable liquid (Class 3, UN 1307, flash point about 25 °C) and its vapor is heavier than air. Keep it away from heat, sparks and oxidizers, ground containers during transfer, and work with adequate ventilation. It is an irritant to eyes, skin and the respiratory tract, and high vapor exposure can cause headache and dizziness (GHS H226, H315, H319, H332). Wear protective gloves and goggles, and store in sealed containers in a cool, dry place.
Frequently Asked Questions
What is another name for p-xylene? p-Xylene is also called para-xylene, 1,4-dimethylbenzene, p-xylol, 1,4-xylene and p-dimethylbenzene. Its CAS number is 106-42-3.
Why is p-xylene so important? It is the main feedstock for purified terephthalic acid (PTA), which is used to make PET polyester for bottles, packaging and textiles. About 98% of p-xylene goes into this chain.
What is the difference between p-xylene and o-xylene? The methyl groups sit at the 1,4- (para) positions in p-xylene (CAS 106-42-3) and at the 1,2- (ortho) positions in o-xylene (CAS 95-47-6). They have different CAS numbers, melting points and uses.
What is the purity of commercial p-xylene? Typical industrial purity is 99% minimum, with premium grades of 99.5% or higher available for PET-grade PTA production.
Does p-xylene freeze at room temperature? It solidifies at 13.3 °C, so it can freeze in cold warehouses or during winter transport; heated storage or insulated transfer lines are often required.
How is p-xylene transported? It ships as UN 1307 Class 3 flammable liquid, Packing Group III, in drums, IBCs, ISO tanks or dedicated chemical tankers, with full dangerous-goods documentation.
