Knowledge

What Is Ethylene Glycol (CAS 107-21-1) Used For? Main Industrial Applications

Dec 01, 2025 Leave a message

What Is Ethylene Glycol?

Ethylene glycol, commonly abbreviated EG and also called monoethylene glycol or MEG, is an organic compound with the molecular formula C2H6O2 and the structure HOCH2CH2OH. Its CAS number is 107-21-1. At room temperature it is a colourless, odourless, viscous liquid with a melting point of about -13 °C and a boiling point of around 197 °C. It is fully miscible with water, with alcohols and with many organic solvents, and common synonyms include ethane-1,2-diol, ethylene alcohol and 1,2-dihydroxyethane.

Property Value
CAS number 107-21-1
Molecular formula C2H6O2
Synonyms Monoethylene glycol (MEG), ethane-1,2-diol, ethylene alcohol
Appearance Colourless, odourless, viscous liquid
Melting point About -13 °C
Boiling point About 197 °C
Solubility Fully miscible with water, alcohols and many organic solvents

Industrially, ethylene glycol is produced mainly from ethylene oxide, which is obtained by the oxidation of ethylene; the oxide is then hydrolysed to the diol. Global consumption is dominated by a single downstream chain, polyester, which is why ethylene glycol pricing usually tracks the polyester value chain.

Polyester and PET: The Largest Use

About 65 percent of ethylene glycol is consumed in the manufacture of polyethylene terephthalate, PET. PET is made by polymerising ethylene glycol with terephthalic acid, and the resulting polymer is spun into polyester fibre for textiles, blow-moulded into beverage bottles, and cast into films and packaging. Demand for ethylene glycol is therefore closely tied to textile and packaging activity, and buyers of MEG typically track the same indicators as their polyester customers.

Antifreeze, Coolants and De-icing Fluids

About 20 percent of ethylene glycol goes into antifreeze and engine coolants. Dissolved in water, it depresses the freezing point and raises the boiling point of the mixture, protecting engines in both cold and hot climates. The same principle is applied in aircraft and runway de-icing fluids and in heat-transfer fluids for HVAC systems. In these products ethylene glycol is blended with corrosion inhibitors and other additives that tailor the fluid to its duty, which is why a finished coolant is not the same substance as the raw diol.

Chemical Intermediates, Solvents and Specialty Uses

About 8 percent of ethylene glycol is used as a chemical intermediate and solvent. It is converted into glycol ethers, plasticisers, and alkyd or unsaturated polyester resins, and it serves as a solvent in paints, inks, dyes and industrial cleaners. It also appears in hydraulic and brake fluids, where its high boiling point and water compatibility are useful. These applications depend on the same chemistry that makes the molecule valuable in polymers: its two hydroxyl groups react readily to form esters and ethers.

Outside the three main markets, ethylene glycol is used to remove water vapour from natural gas streams and to suppress hydrate formation in pipelines. Smaller uses include acting as a humectant in paper and tobacco, as a carrier for fragrances, as a component of electrolytic capacitors, and as a fluid in certain cryogenic and heat-transfer systems.

Toxicity and Safe Handling

Ethylene glycol is highly toxic if swallowed. It has a sweet taste, which makes accidental ingestion particularly dangerous for children and animals, and in the body it is metabolised into acidic species that can damage the kidneys and liver. Even a relatively small amount can be fatal without prompt medical treatment, so suspected ingestion requires immediate emergency care.

The material also reacts violently with strong oxidising agents and must be stored away from them. For bulk handling, use gloves and eye protection, work in a ventilated area, keep containers sealed and clearly labelled, and contain spills so that the product cannot reach waterways. Because it is readily biodegradable, well-managed disposal is both a legal and an environmental necessity.

Frequently Asked Questions

Q: What is ethylene glycol used for?
About 65 percent is used to make PET polyester, about 20 percent goes into antifreeze and coolants, and about 8 percent is used as a chemical intermediate and solvent, with smaller specialty applications.

Q: What is the CAS number of ethylene glycol?
The CAS number is 107-21-1 and the molecular formula is C2H6O2.

Q: Is ethylene glycol the same as antifreeze?
Not exactly. Ethylene glycol is the main active ingredient in many antifreeze products, but a finished antifreeze is a formulated product that also contains corrosion inhibitors and other additives.

Q: Why is ethylene glycol toxic?
If swallowed, it is metabolised into toxic acids that can damage the kidneys and liver. Its sweet taste increases the risk of accidental ingestion, so it must be kept away from children and animals.

Q: Does ethylene glycol mix with water?
Yes. It is completely miscible with water, with alcohols and with many organic solvents.

Q: What does MEG mean?
MEG stands for monoethylene glycol, another common name for the same compound, ethylene glycol, CAS 107-21-1.

Send Inquiry