Knowledge

Methacrylic Acid (MAA) CAS 79-41-4: Properties, Reactions and Main Uses

Oct 28, 2025 Leave a message

What Is Methacrylic Acid (MAA)?

Methacrylic acid is an alpha,beta-unsaturated carboxylic acid with the formula C4H6O2 and CAS number 79-41-4. Its molecule carries both a carboxyl group and a carbon-carbon double bond, so it combines the reactivity of an acid with the polymerising ability of a vinyl monomer. That dual character is why MAA sits at the head of the methacrylate value chain.

Industrially the acid is produced on a large scale, mainly through the acetone cyanohydrin route and through catalytic oxidation of isobutylene or tert-butanol, and most of the output is consumed as ester derivatives rather than as the free acid. Methyl methacrylate is the largest-volume downstream product.

Physical Properties

Property Typical value
Chemical name Methacrylic acid (MAA)
CAS number 79-41-4
Molecular formula C4H6O2
Molar mass 86.09 g/mol
Appearance Colourless viscous liquid
Melting point about 15 to 16 C
Boiling point about 161 C
Density at 20 C about 1.015 g/cm3
pKa in water at 25 C about 4.66
Assay, commercial grade 99.0 to 99.5 percent
Stabiliser about 200 mg/kg monomethyl ether hydroquinone
Transport class UN 2531, Class 8, packing group II

Because the melting point sits close to ambient temperature, MAA can partly crystallise when the surrounding temperature drops. Storage tanks and drums therefore need trace heating or warm rooms that keep the material free-flowing, and any solidified product must be melted gently and mixed before use.

Chemical Reactivity and Polymerisation

The carboxyl group neutralises with bases to give methacrylate salts and esterifies with alcohols to give the corresponding methacrylate esters, of which methyl, ethyl, butyl, isobutyl, hydroxyethyl and glycidyl esters are commercially important. The double bond undergoes free-radical polymerisation with peroxides or azo initiators to give polymethacrylic acid, and it copolymerises readily with styrene, acrylates and acrylonitrile.

At elevated temperature MAA decomposes and releases irritating gases, and polymerisation becomes difficult to control. Distillation and drying must therefore limit temperature and residence time, avoid local overheating, and keep the stabiliser effective, which for MEHQ also requires dissolved oxygen in the liquid.

The MAA, MMA and PMMA Value Chain

Esterification of methacrylic acid with methanol gives methyl methacrylate, and polymerisation of MMA gives polymethyl methacrylate, known as acrylic glass. PMMA transmits more than 92 percent of visible light, resists weathering well and has useful impact strength, which is why it appears in aircraft glazing, building skylights, automotive lamp lenses, display stands and solar filter covers.

MAA is the origin of this chain, so the cost and availability of MMA and PMMA depend heavily on the supply position of the acid. Beyond esterification, MAA can be copolymerised directly, which introduces carboxyl functionality into the polymer backbone and improves adhesion, pigment dispersion and crosslinking behaviour.

Coatings, Adhesives and Sealants

MAA is an important comonomer in high-performance coatings: automotive clearcoats, industrial maintenance paints and waterborne architectural paints. Adding a small proportion of carboxyl monomer raises film adhesion to the substrate and improves hardness, gloss retention and weather resistance, so the protective life of the coating is extended.

In adhesives and sealants, MAA is used to build acrylic structural adhesives, anaerobic threadlockers and pressure-sensitive adhesives. The carboxyl group strengthens bonding to metal, glass and plastics, and cured products show noticeably better heat and solvent resistance than simple acrylate formulations.

Plastics, Textiles, Construction and Medical Uses

Specialty acrylic resins and modified engineering plastics with improved transparency, heat resistance and surface hardness.

Fabric finishing agents and sizing agents that improve wrinkle resistance, elasticity and hand feel.

Polycarboxylate superplasticisers for concrete, which lower the water-cement ratio, improve flow and early strength and reduce cement consumption.

Waterproof coatings, sealants and dispersing agents for construction chemicals.

PMMA bone cement for fixation in orthopaedic surgery, contact lens materials and drug carrier systems.

Storage, Handling and Safety

Methacrylic acid is corrosive. Contact with skin or eyes causes burns, and vapour irritates the respiratory tract, so handling areas need local exhaust ventilation and workers need chemical-resistant gloves, goggles and face protection. Transfer lines, pumps and tanks are built from stainless steel or lined materials, and temperature in storage is normally held in a range that keeps the acid liquid yet far below polymerisation conditions. Tanks are usually blanketed with air rather than inert gas so that the dissolved-oxygen-dependent inhibitor keeps working, and inventory is turned over on a first-in, first-out basis.

Frequently Asked Questions

Q: What is the relationship between methacrylic acid and methyl methacrylate?
Esterification of methacrylic acid with methanol produces methyl methacrylate (MMA), which is the most important ester derivative of MAA and the monomer used to make PMMA.

Q: What material is PMMA?
PMMA is polymethyl methacrylate, commonly called acrylic glass. Polymerisation of MMA gives a transparent, weather-resistant plastic used in aviation glazing, construction and automotive lighting.

Q: Is methacrylic acid soluble in water?
It dissolves in water and is miscible with most polar organic solvents such as alcohols, ketones and esters.

Q: What are the hazards of methacrylic acid?
MAA is corrosive and irritating. Vapour irritates skin and the respiratory tract, and the acid decomposes at high temperature to release irritating gases, so protective equipment and temperature control are required.

Q: What role does methacrylic acid play in coatings?
As a comonomer it improves adhesion, hardness, weather resistance and gloss of the paint film, and it is widely used in automotive clearcoats and industrial coatings.

Q: Why does methacrylic acid appear to freeze near room temperature?
Its melting point is about 15 to 16 C, only slightly below ambient, so cold weather can cause partial crystallisation. Warm storage and gentle remelting with mixing restore a uniform liquid.

Send Inquiry