What Is Methyl Tert-Butyl Ether?
Methyl tert-butyl ether, widely known as MTBE, is an organic compound registered under CAS number 1634-04-4. Its molecular formula is C5H12O, and its systematic name is 2-methoxy-2-methylpropane. MTBE is a volatile, flammable, colorless liquid at room temperature with a characteristic ethereal odor. It is only slightly soluble in water, with a solubility of about 42 grams per liter, and it mixes easily with most organic solvents.
How Is MTBE Produced?
MTBE is manufactured by the chemical reaction of methanol with isobutylene. Methanol is commonly derived from natural gas, while isobutylene is produced from butane obtained from crude oil or natural gas processing. The reaction is catalyzed and typically carried out in the liquid phase, yielding high-purity MTBE that can be used directly as a fuel component or as a solvent. This manufacturing route is well established and highly efficient on an industrial scale.
Key Physical Properties
MTBE has a molecular weight of 88.15 grams per mole. It boils at 55 to 56 degrees Celsius at atmospheric pressure and freezes at about minus 110 degrees Celsius. Its density is 0.7404 grams per cubic centimeter at 20 degrees Celsius, and its vapor density is about 3.1 times that of air. The vapor pressure is about 4.05 psi at 20 degrees Celsius, and the flash point is around minus 27 degrees Fahrenheit. The refractive index is 1.369 at 20 degrees Celsius. These properties make MTBE an excellent low-boiling solvent that can be removed easily by distillation.
Main Applications of MTBE
Historically, the primary use of MTBE has been as a gasoline additive that raises the octane rating and improves engine combustion. Because it contains oxygen, MTBE also promotes more complete combustion, which reduces carbon monoxide emissions from vehicles. Beyond fuel applications, MTBE is used as a solvent in pharmaceutical manufacturing and chemical reactions, where its ability to dissolve a wide range of organic compounds is valuable. Its low water solubility and low boiling point also make it convenient as an extraction agent in laboratory and industrial processes.
Handling and Environmental Considerations
MTBE is flammable, and its vapors can form explosive mixtures with air, so it must be stored in grounded, properly labeled containers in cool, ventilated areas away from ignition sources. In some regions, MTBE use in gasoline was reduced because of concerns about groundwater contamination from leaks and spills. Operators should follow local regulations on fuel blending and handle the product with the same care applied to other volatile organic solvents.
Frequently Asked Questions
What is MTBE made from? MTBE is made by reacting methanol with isobutylene. Methanol comes mainly from natural gas, and isobutylene is derived from butane obtained from crude oil or natural gas.
Is MTBE still used in gasoline? Yes, MTBE is still blended into gasoline in many countries to raise octane and reduce emissions, although some regions have restricted its use because of groundwater concerns.
Is MTBE soluble in water? MTBE has limited solubility in water, about 42 grams per liter. It is much more soluble in organic solvents, which is why it works well as an extraction agent.
What is the boiling point of MTBE? MTBE boils at 55 to 56 degrees Celsius at atmospheric pressure, which is low enough for easy removal by distillation after extraction or reaction.
Is MTBE flammable? Yes, MTBE is a flammable liquid with a flash point around minus 27 degrees Fahrenheit. It should be kept away from ignition sources and stored with proper ventilation.
