Knowledge

What Is Tetrahydrofuran Used For? Main Applications of THF CAS 109-99-9

Sep 28, 2025 Leave a message

What Tetrahydrofuran Is

Tetrahydrofuran, or THF, is a cyclic ether with the chemical formula C4H8O and the CAS number 109-99-9. It is a clear, polar and aprotic liquid that is fully miscible with water and with a very wide range of organic solvents. THF boils at about 66 °C and has a flash point of about minus 14 °C, which makes it a low-boiling and flammable solvent that must be handled with proper ventilation and grounding.

Property Typical value
CAS number 109-99-9
Molecular formula C4H8O
Molecular weight 72.11 g/mol
Boiling point about 66 °C
Flash point about -14 °C
Density at 20 °C about 0.889 g/cm3
Miscibility with water complete
Refractive index about 1.407

Its ability to dissolve compounds of very different polarity is what makes tetrahydrofuran indispensable across sectors that have little else in common, from polymer production to pharmaceutical research and analytical laboratories.

Polymer Manufacturing and PTMEG

Polymer manufacturing is the single largest application of THF. The solvent is polymerised by ring-opening to produce polytetramethylene ether glycol, commonly known as PTMEG, which is a key building block for high-performance elastic fibres such as spandex and for thermoplastic polyurethanes. In this process the resulting PTMEG provides the soft segments that give spandex and polyurethane elastomers their stretch, recovery and resilience.

Because fibre and elastomer performance depends on the molecular weight distribution of the PTMEG, the purity of the incoming THF matters a great deal. Water, peroxides and carbonyl impurities interfere with the polymerisation catalyst and shift the molecular weight, so producers specify tight limits and monitor them batch by batch.

PVC Solvent Cements and Coatings

THF is an excellent solvent for polyvinyl chloride. It is the main active component of PVC cements and adhesives used in plumbing and construction. When the cement is applied to PVC surfaces, THF dissolves the plastic locally so that two pieces fuse into a strong welded joint as the solvent evaporates. The action is fast and reliable, which is why solvent-welded PVC pipe systems depend on THF-based cements for leak-tight joints in drainage, water supply and industrial piping.

In coatings, printing inks and adhesives, THF is used where a strong solvency for PVC and other vinyl resins is needed, and it also appears in formulations for surface treatment and cleaning of plastic parts. Its volatility allows fast drying without leaving residue that would affect adhesion or appearance.

Chemical Synthesis and Laboratory Use

In research laboratories and in the pharmaceutical industry, THF is a preferred solvent for a wide range of reactions, including Grignard reactions, hydroboration and polymerisation. It stabilises anions and dissolves organometallic compounds, which is valuable in organometallic chemistry. Its aprotic nature means it does not interfere with reagents that react with acidic protons, making it a versatile medium for air-sensitive and moisture-sensitive chemistry.

Grignard and organometallic reactions requiring a dry, aprotic medium

Hydroboration and other reductions where a coordinating ether is needed

Mobile phase in liquid chromatography for complex mixtures

Solvent for nuclear magnetic resonance spectroscopy and sample preparation

Polymer dissolution and gel permeation chromatography

Cleaning and degreasing of laboratory equipment

Its strong elution power helps separate complex mixtures, and its volatility allows easy sample recovery after analysis.

Safe Handling, Storage and Peroxide Control

THF is flammable and its vapours may form explosive mixtures with air. It reacts with acids and with strong bases such as potassium hydroxide and sodium hydroxide, and open flames and strong oxidising agents create combustion hazards. THF also forms explosive peroxides when it is stored in contact with air for long periods, which is the single most important safety issue in its day-to-day use.

Containers should be kept sealed and stored under an inert atmosphere where practical, in a cool place away from ignition sources and oxidisers, and with adequate ventilation. Solvent that has been opened and stored must be tested for peroxides before it is distilled, and aged material with high peroxide levels should never be distilled to dryness. Because THF is miscible with water, aqueous quenching and spill procedures must account for rapid mixing, and transfers should be bonded and grounded to prevent static ignition.

Frequently Asked Questions

Q: What is THF used for in industry?
THF is mainly used to produce PTMEG for spandex and thermoplastic polyurethanes, and as a solvent for PVC cements, coatings, adhesives and printing inks.

Q: Is THF used to make spandex?
Yes. THF is polymerised to polytetramethylene ether glycol, which is a key raw material for spandex fibres and thermoplastic polyurethane elastomers.

Q: Can THF dissolve PVC?
Yes. THF is an excellent solvent for PVC and is the main active ingredient in the PVC pipe cements and adhesives used in plumbing work.

Q: Why is THF used in chemical synthesis?
THF is a polar aprotic solvent that stabilises anions and dissolves organometallic compounds, making it suitable for Grignard reactions, hydroboration and polymerisation.

Q: Is THF dangerous to handle?
It is flammable, can form explosive peroxides on storage and reacts with acids and strong bases, so it needs ventilation, sealed storage and peroxide testing before distillation.

Q: What is the CAS number of THF?
The CAS number of tetrahydrofuran is 109-99-9 and its molecular formula is C4H8O, with a molecular weight of 72.11 g/mol.

Send Inquiry