Knowledge

Is o-Xylene the Same as Ortho-Xylene? CAS 95-47-6 Facts

Jan 28, 2026 Leave a message

Is o-Xylene the Same as Ortho-Xylene?

Yes. o-Xylene and ortho-xylene are two names for the same chemical, 1,2-dimethylbenzene (CAS 95-47-6). The prefix "o-" is simply the standard abbreviation of "ortho," which describes the position of the two methyl groups on the benzene ring: they are attached to adjacent carbon atoms, i.e., the 1,2-position. No other isomer carries this name, so the two terms are fully interchangeable in specifications, SDS documents and purchase orders.

Xylene exists as three positional isomers: ortho-xylene (1,2-dimethylbenzene, CAS 95-47-6), meta-xylene (1,3-dimethylbenzene, CAS 108-38-3) and para-xylene (1,4-dimethylbenzene, CAS 106-42-3), plus ethylbenzene as a common co-component in mixed xylene streams. Each isomer has a distinct melting point and downstream use, which is why buyers must specify the exact isomer and CAS number.

o-Xylene Specifications (CAS 95-47-6)

Parameter Value
CAS number 95-47-6
Molecular formula C8H10
Molecular weight 106.17 g/mol
Boiling point 144.4 °C
Melting point -25.2 °C
Flash point (closed cup) 32 °C
Density at 20 °C 0.880 g/cm³
Appearance Colorless transparent liquid
Purity 99% min
UN number / class UN 1307, Class 3, Packing Group III
HS code 2902410000
EINECS number 202-422-2

Note: 144.4 °C is the boiling point of o-xylene, not its melting point. The melting point is about -25.2 °C, so the product is a free-flowing liquid at ambient temperature. For transport, o-xylene is classified as a flammable liquid, Class 3, Packing Group III under UN 1307, not as a corrosive (Class 8) substance.

Synonyms of o-Xylene

Ortho-xylene

1,2-Dimethylbenzene

1,2-Xylene

o-Xylol

Dimethylbenzene (isomer-specific)

Main Industrial Uses of o-Xylene

Phthalic anhydride. The largest outlet for o-xylene is vapor-phase oxidation to phthalic anhydride, an intermediate for phthalate plasticizers, alkyd resins and polyester resins.

Solvent applications. o-Xylene dissolves resins, oils and fats and is used in paints, printing inks, agricultural formulations and cleaning systems where a slow-evaporating aromatic solvent is required.

Chemical synthesis. It is a starting material for dyes, pigments, pharmaceuticals, pesticides and specialty fine chemicals.

Because o-xylene has the highest boiling point of the three xylene isomers, it is also the fraction recovered by distillation in aromatics plants and can be used as a high-boiling reaction medium.

Safety and Transport Considerations

o-Xylene is flammable and its vapor is heavier than air, so it can accumulate at low points and travel to distant ignition sources. Keep it away from heat, sparks, open flames and strong oxidizers, and bond containers during transfer. Vapor inhalation and skin contact should be avoided: work under ventilation, wear protective gloves and goggles, and store in sealed containers in a cool, dry place with clear GHS labeling (H226, H315, H319, H332).

Frequently Asked Questions

Is o-xylene the same as ortho-xylene? Yes, they are identical. "o-" abbreviates "ortho," and both names refer to 1,2-dimethylbenzene with CAS number 95-47-6.

What is the difference between o-xylene, m-xylene and p-xylene? The three isomers differ only in the position of the two methyl groups on the benzene ring: 1,2- (ortho), 1,3- (meta) and 1,4- (para). They have different CAS numbers, melting points and chemical reactivity, so they are used for different products.

What is the boiling point of o-xylene? o-Xylene boils at 144.4 °C at atmospheric pressure, the highest of the xylene isomers, and melts at about -25.2 °C.

What is o-xylene used for? Its main use is oxidation to phthalic anhydride for plasticizers and resins. It is also used as a solvent and as an intermediate for dyes, pharmaceuticals and pesticides.

How is o-xylene classified for shipping? o-Xylene ships as UN 1307, a Class 3 flammable liquid, Packing Group III, under the IMDG, ADR and other dangerous-goods regulations.

What purity is available for industrial supply? Typical industrial grade is 99% minimum purity, with higher-purity grades available on request for sensitive applications. COA and SDS are provided with each shipment.

Request an o-Xylene CAS 95-47-6 Quote? We supply 99% min o-xylene in drums, IBCs and ISO tanks with full export documentation. Send your quantity and destination for a prompt quotation.

Send Inquiry