Knowledge

Acetonitrile CAS 75-05-8: Properties, Grades and Industrial Applications

Jan 29, 2026 Leave a message

What Is the CAS Number of Acetonitrile?

Acetonitrile carries the CAS number 75-05-8. Its molecular formula is CH3CN, its molecular weight is 41.05 g/mol, and it is the simplest organic nitrile. The material is a colourless, mobile liquid with a mild, ether-like odour, and it is miscible with water and with most common organic solvents. Commercially it is produced mainly as a by-product of acrylonitrile manufacture, then purified by distillation to the specification required by the end use.

The nitrile group gives the molecule a high dipole moment and a low UV cut-off, which is why it has become the standard mobile phase for high-performance liquid chromatography and a preferred solvent for reactions that need a polar, aprotic medium.

Physical and Chemical Properties

Property Typical value
CAS number 75-05-8
Formula CH3CN
Molecular weight 41.05 g/mol
Appearance Colourless liquid, mild odour
Boiling point 81.6 °C
Melting point -45 °C
Density at 20 °C 0.786 g/cm3
Flash point (closed cup) 2 °C
Water solubility Miscible in all proportions
Transport classification UN 1648, Class 3, Packing Group II

Because the flash point is only 2 °C, acetonitrile is treated as a low-boiling flammable liquid in every stage of storage, sampling and transfer. The high dielectric constant, moderate viscosity and low absorbance in the ultraviolet region make it equally valuable in the analytical laboratory and in chemical synthesis.

Industrial and Laboratory Applications

Chromatography: acetonitrile is the workhorse mobile phase for reversed-phase HPLC, and it is also used in thin-layer chromatography, paper chromatography, spectroscopy and polarographic analysis. Its low UV cut-off allows detection at short wavelengths.

Pharmaceutical intermediates: the nitrile group is a versatile handle for building amines, amides, amidines and heterocycles, so acetonitrile is used to synthesise a wide range of active pharmaceutical ingredients and their precursors.

Agrochemical synthesis: it serves as both solvent and reactant in the manufacture of pesticides and crop-protection intermediates.

Electronics cleaning: high-purity grades remove grease, wax, fingerprints, corrosive residues and flux from silicon wafers and other components in semiconductor and display production.

Extraction and analysis: it extracts a broad range of polar and moderately non-polar analytes, and it is widely used in sample preparation for environmental and food testing.

Specialty chemistry: it is a solvent for synthetic fibres, an electrolyte co-solvent in battery research, and a medium for polymer and catalyst work.

Grades and Purification Levels

Industrial grade: 99.5% minimum assay for general synthesis and extraction duty.

HPLC grade: 99.9% minimum assay, water content at or below 0.03%, non-volatile residue at or below 5 mg/L and a UV cut-off near 190 nm.

Gradient grade: controlled absorbance across the UV range for gradient elution methods that demand a flat baseline.

Anhydrous grade: water below 0.005% for moisture-sensitive reactions and organometallic chemistry.

Electronic grade: trace-metal levels controlled at low parts-per-billion for wafer cleaning and precision component work.

Each grade is released against a certificate of analysis that reports assay by gas chromatography, water by Karl Fischer titration, non-volatile residue and UV absorbance at the wavelengths the customer specifies.

Packaging, Storage and Safety

Acetonitrile is a flammable, toxic liquid that is harmful if swallowed, inhaled or absorbed through the skin. It is metabolised to cyanide in the body, so exposure control is a genuine process-safety issue rather than a formality. Vapour is heavier than air and can travel to a remote ignition source.

Packaging: foil-lined bags and bottles for quantities below 25 kg; 25 kg, 160 kg and 200 kg drums, intermediate bulk containers and dedicated tankers for bulk volumes.

Storage: cool, dry, well-ventilated area in closed, grounded containers, away from heat, sparks and open flames; keep separate from oxidising agents and strong acids.

Engineering controls: local exhaust ventilation at filling and sampling points, with vapour monitoring where operators work in enclosed spaces.

Personal protection: chemical goggles, solvent-resistant gloves and appropriate respiratory protection when vapour levels are not controlled.

Documentation: safety data sheet, technical data sheet and batch certificate accompany every shipment.

Frequently Asked Questions

Q: What is the CAS number of acetonitrile?
The CAS number of acetonitrile is 75-05-8, with the formula CH3CN and a molecular weight of 41.05 g/mol.

Q: Is acetonitrile miscible with water?
Yes. Acetonitrile mixes with water and most organic solvents in all proportions.

Q: What is acetonitrile used for?
It is used as an HPLC mobile phase, as a solvent and reactant in pharmaceutical and agrochemical synthesis, for semiconductor wafer cleaning and for extraction work.

Q: Why does acetonitrile matter for HPLC analysis?
Its low UV cut-off near 190 nm, low viscosity and high elution strength give sharp peaks and stable baselines in reversed-phase methods.

Q: How should acetonitrile be stored?
Keep it in closed, grounded containers in a cool, ventilated area away from ignition sources, oxidising agents and strong acids.

Q: What purity grades are available?
Industrial, HPLC, gradient, anhydrous and electronic grades are available, with purity from 99.5% to 99.9% and water content from 0.03% down to 0.005%.

Send Inquiry