What is Mixed Xylene (CAS 1330-20-7)?
Mixed Xylene is a clear, colorless liquid aromatic hydrocarbon solvent composed of a blend of three xylene isomers - ortho-xylene, meta-xylene and para-xylene - typically alongside a small amount of ethylbenzene. Mixed Xylene is one of the most widely used industrial solvents in the world, valued for its strong solvency, controlled evaporation rate and broad compatibility with resins used across the paint, coating, adhesive and printing ink industries.
Mixed Xylene (CAS 1330-20-7) is produced from petrochemical aromatic streams and is supplied in industrial and technical grades depending on the isomer ratio and purity required by the end application. It has a boiling range of approximately 137–140°C, a closed-cup flash point of approximately 27–32°C, and a density of approximately 0.86–0.87 g/cm³ at 20°C - properties that make it a mid-range evaporating solvent suitable for a wide range of formulation needs.

Mixed Xylene for Paints and Coatings
Xylene is one of the most commonly used solvents in solvent-based industrial paints, protective coatings, metal primers and alkyd enamels. It dissolves alkyd resins, epoxy esters, chlorinated rubber and many other synthetic resin systems, helping formulators achieve the correct application viscosity for spray, brush, dip or roller application. Its medium-slow evaporation rate gives applicators sufficient open time while still supporting smooth film formation, even leveling and good gloss development. See our related article on the evaporation rate of mixed xylene for a comparison against toluene and ethyl acetate.
Mixed Xylene is widely used in:
- Industrial and machinery paints
- Metal paints and anti-corrosive coatings
- Protective and maintenance coatings for infrastructure and heavy equipment
- Alkyd enamels and general industrial finishes
- Epoxy-ester and baking finishes
For a full breakdown of applications, see our article on what mixed xylene is used for in paints and coatings.
Xylene for Adhesives and Printing Inks
Beyond paints, Xylene is also used in solvent-based adhesive systems and printing inks. In adhesives, it helps dissolve rubber-based and resin-based binders and adjusts application viscosity for spraying, brushing or roll-coating. In printing inks, Mixed Xylene is used where the resin and pigment system is compatible with aromatic hydrocarbon solvents, supporting consistent flow and drying performance on press.
Safety
CAS 1330‑20‑7 Xylene is classified as a flammable liquid (GHS Category 3) with a closed-cup flash point of approximately 27–32°C, and should be stored away from heat, sparks and open flame, in a cool, well-ventilated area. It is shipped under UN 1307 (Xylenes), Class 3, Packing Group III. Handlers should use appropriate PPE - chemical-resistant gloves, eye protection and, where needed, respiratory protection - and ensure adequate ventilation, since vapors are heavier than air and can accumulate in low-lying areas. Always consult the current SDS/MSDS before storage, handling or transport. See our detailed article on the flash point of mixed xylene for full safety and transport guidance.
Why Choose GNEE BIO?
At GNEE BIO, we are more than just a supplier; we are your dedicated partner in success.
- Premium Quality: Rigorous quality control ensures our Mixed Xylene meets the specifications required for paint, coating, adhesive and ink formulation.
- Timely Delivery: We have strong logistics to ensure safe and timely delivery, with flexible packaging including drums, IBC tanks and ISO tanks.
- Technical Expertise: Our team has deep knowledge of xylene solvent applications and can help you select the right grade and dosage for your resin system and application method.
- Competitive Value: We deliver exceptional quality and service at competitive prices, backed by COA, SDS/MSDS and TDS documentation, with third-party inspection (e.g., SGS) available on request.
Contact Us:
Email: sales@gneebio.com
Our company
GNEE BIO is a professional chemical raw materials supplier. We have passed the quality system certification, have self-managed import and export rights, and our products are well received by customers. As a leading global supplier, we deliver certified chemical raw materials compliant with REACH, ROHS, ISO, and other international standards.

