What is the purity of o-xylene Chemical CAS 95-47-6?
The purity of commercial o-xylene (ortho-xylene, CAS 95-47-6) depends on the product specification and intended application. There is no single purity value that applies to every technical-grade or industrial product.
For procurement, buyers should confirm the required o-xylene content, relevant impurity limits, analytical method and acceptance criteria before comparing supplier quotations. A stated purity percentage alone may not provide enough information to determine whether a product is suitable for a particular process.
CAS 95-47-6 O-xylene, also known as 1,2-dimethylbenzene,ortho-xylene, 1,2-xylene. Both laboratory and technical grades of this chemical typically have a purity range from 98% to more than 99.5% when tested by gas chromatography (GC). For more demanding application scenarios, higher purity grades are also supplied to meet professional production and experimental needs.

How Is o-Xylene Purity Measured?
Gas chromatography (GC) is commonly used to analyze the composition of o-xylene and quantify relevant organic components. However, the reported result must be interpreted according to the test method and the basis used in the specification.
For example, GC area percentage and mass percentage are not automatically interchangeable. Buyers should confirm whether the reported purity is expressed as GC area %, weight percentage or another agreed basis.
What Should Buyers Check on an o-Xylene COA?
A batch Certificate of Analysis (COA) reports test results for a specific batch. Before accepting an o-xylene shipment, compare the COA with the agreed purchase specification.
| COA Item | What Buyers Should Check | Why It Matters |
|---|---|---|
| Product identity | o-Xylene, CAS 95-47-6 | Helps distinguish o-xylene from mixed xylene |
| Assay or purity | Reported result and analytical basis | Confirms compliance with the agreed purity requirement |
| m-Xylene and p-Xylene | Results or limits where specified | Relevant where isomer composition affects the process |
| Ethylbenzene | Result or limit where specified | May be relevant to the required composition |
| Other impurities | The specific parameters listed in the purchase specification | Ensures the agreed impurity limits are met |
| Test method | Applicable analytical method | Helps buyers compare results consistently |
| Batch traceability | Batch or lot number and test date | Links the COA to the relevant material |
Not every specification requires every item listed above. The parameters and acceptance limits should be agreed between buyer and supplier before the order is placed.
Why Does o-Xylene Purity Matter in Industrial Applications?
Purity requirements depend on the downstream process. For example, a chemical process may have specific limits for certain impurities because they can affect reaction performance, separation requirements or final product quality.
Buyers should therefore avoid choosing a product solely because its quoted purity is higher. The more useful comparison is whether the complete specification meets the process requirements at an acceptable commercial cost.
Is 99% o-Xylene Always Better Than 98%?
Not necessarily. A higher stated assay does not automatically mean a product is more suitable for every application.
The analytical basis, identity of the remaining components and specific impurity limits also matter. A buyer should compare the actual product specifications and batch COAs rather than relying only on the headline purity percentage.
What Should Buyers Request Before Placing an Order?
Before purchasing o-xylene, request or confirm the following:
- The applicable product specification and required minimum assay.
- Maximum limits for relevant impurities.
- The analytical method and basis used to report purity.
- A representative specification and, where applicable, a batch-specific COA.
- The current SDS and applicable transport documentation.
- Packaging, order quantity and destination-specific shipment requirements.
Request an o-Xylene Specification and COA
GNEE BIO supports B2B chemical supply and export coordination. Buyers can share their required purity, impurity limits, order quantity, packaging preference and destination so that the applicable product specification and documentation can be discussed before quotation.
Please indicate whether your application requires a specific o-xylene assay or limits for individual impurities.
Contact us to Discuss o-Xylene Specifications and Quotation.
Frequently Asked Questions
Q1. What is the typical purity of o-xylene?
A: The required purity depends on the product grade and application. Buyers should refer to the supplier's actual specification rather than assuming a universal purity range for technical-grade o-xylene.
Q2. How is o-xylene purity tested?
A: Gas chromatography (GC) is commonly used to analyze o-xylene composition. The test method and reporting basis should be confirmed before comparing results.
Q3. What is the difference between a product specification and a COA?
A: A product specification defines the agreed quality requirements. A batch COA reports analytical results for a particular batch and should be checked against the specification.
Q4. What impurities should buyers check in o-xylene?
A: Depending on the application, buyers may need to check m-xylene, p-xylene, ethylbenzene and other specified components. The required parameters and limits should be agreed before purchase.
Q5. Should buyers always choose the highest-purity o-xylene?
A: No. Buyers should select a product that meets the required specification and impurity limits. A higher headline purity is not necessarily more suitable if the full composition does not match the application requirements.
Related pages:
o-Xylene CAS 95-47-6 Supplier
o-Xylene physical properties
ortho-Xylene Industrial Applications
o-Xylene Safe Handling Tips
about us
Tianjin Gnee Biotech Co., Ltd. (GNEE BIO) was established in 2021 and is a professional chemical raw material supplier and exporter serving customers worldwide. We specialize in sourcing industrial chemicals for global distributors, manufacturers and industrial users, providing stable supply, competitive pricing and reliable export services.
For Ortho-xylene, we provide bulk supply with flexible packaging options, product specifications and COA, SDS/MSDS and TDS.
GNEE BIO Product Packaging

Customer Visit

